T SHELF
355
With its deeper depth, this T Shelf offers a perfect solution for larger items in smaller spaces. The clean, minimalist design remains refined, while the added depth provides ample room for books, decor, or other essentials. This versatile piece works as a low table or shelf, seamlessly combining practicality and modern elegance.Light Gray
W50 H50 D42
Material
Powder Coated Sheetmetal
Weight
16.2kg
Surface Glossiness
Light Gray 30
Deep Green 20
Matte Tengerine 10
*Full Gloss 100
The T SHELF requires assembly, which takes approximately 20 minutes.
Tools and assembly instructions are included with the product.
Precautions for Use
-This shelf is designed to be used safely for general storage purposes.
-The maximum weight capacity for each shelf is 30 kg. Do not exceed this weight limit.
-Avoid standing on the shelf or sitting on it with your weight, as this could damage the product and lead to safety accidents.
-Please ensure that the load is evenly distributed across the shelf to avoid placing the weight on only one side (front or back).
-Be cautious of the sharp edges to prevent injury to children.
-The shelf is made of 1.6T steel plate, which is heavy. Be careful not to drop the plates during assembly, and always handle them safely to avoid injury.
-Follow the assembly instructions step by step. Incorrect assembly could lead to product damage or accidents.
-The bottom surface of the shelf may damage the floor. Be sure to attach the included silicone guards after assembly.
-After installation, verify that the shelf is level and stable.
Powder-Coated Shelf Defect Standards
Due to the nature of the powder coating process, minor dust particles, stains, or color differences may occur on the surface of the product. These are unavoidable phenomena that do not affect the use or quality of the product. Please note that the following are not considered defects:
-Dust particles smaller than 1mm in width or height
-Minor stains or marks visible only from certain angles
-Slight differences in color or texture depending on the lighting or angle
-Slight tone differences between parts, even if they are the same color
-Uneven coating or minor scratches on internal surfaces or areas not visible after assembly
-Minor variations in paint thickness at corners or joints
-If any external defects exceed these standards, we offer free replacement parts. If you notice any issues upon receiving the product, please contact customer service.